落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高线电压小感应电流经过多次实验发现仪(耐弧光经过多次实验发现仪)-(来计算机软件保持)

High voltage low current tester (arc resistance tester) - (computer control)

產称谓称:耐电弧试验机

Product name: electric arc resistance tester

产品设备型號:NDH-A

Product model: NDH - A

满足了标淮:GB/T 1411-2002《气体接地装修材料耐高压得很低感应电流电弧发出电发出电的校正》(等同于IEC  61621-1997)及ASTM D495等细则的要制作制作业的,并契合IEC 149、UL 746A等试验装置的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重要适合标准及的功能:

本做实验的时候机是依照规定应用软件于电动机、电子产品和家廷用电户子产品等这个行业的水电工用橡胶、不饱和树脂胶胶和耐压漆等耐压建材的耐脉冲能力评定标准,主使用在粉末状耐压建材如:橡胶、贴膜、不饱和树脂胶、白云母、卫浴陶瓷、窗户玻璃、耐压油、耐压漆、厚纸板等有机溶剂的耐脉冲能力检查;

本进行研究英文设计机由运算机控住行驶,能否表现现在进行研究英文的情况及进行研究英文用时,进行研究英文结束之后并手机截图现在进行研究英文统计数据,并可打印文件.基准实验室情况汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为下合二为一结构设计,下部分为控制平台,上端为检测箱。

2 本服务按照*新智慧的控制技能,经过选取应用程序(IEC或ASTM)可主动采取应力测试,并在租赁上提示实验工作和结论。

3 **效果好,抗电磁波辐射专业能力强,软件测试高精性高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断日子随机误差:大于 ±10ms

2 调压器数量:2kVA

3 固定试验装置电流电压:12.5kV

4 实验室检测工作电压高精度:±3%

5 电流值保持定位精度:±10%  电流量精确测量准确度:1.5%

6 金属电极对坯料压为:(0.5±0.05)N

7 金属电极产品:钨棒

8 探针空距:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 选用情况高温:(23±2)℃

10 使用的大环境气温:(50±5)%

11 外接电源:220V±5%  50Hz  10A

12 测试    方案:   标准/美标/10 mA 连着/20 mA 连续式/30 mA联续/40 mA持续

13 可靠性试验过程一下:

源程序段

焊弧工作电流

mA

电弧焊接通断日期s

各环节段不断时期s

可靠性试验总時间s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

接连通

60

240

5

20

多次通

60

300

6

30

联续通

60

360

7

40

连续式通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

编号

品牌

数

微信备注

01

耐电弧放电考试仪

整台

 

02

电级系统性

买套

 

03

参比电极支承

一款

 

04

供电缆线

整套

 

05

保护接地放**

一组

 

06

交流电毫安表

一种

 

07

台式机测控免费软件

一系列

 

08

样品架

一瓶

 

09

电级间隔准则块

2块

 

10

度角规范块

2块

 

11

瓷砖片

2片

 

12

喷墨网页条形码打印机

1台

该品牌

13

确定机

1台

企业

14

操作详细产品说明

1份

 

15

不资格证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 货品应用:

NDH-A    耐电弧放电可靠性试验仪-微机调整

NDH-B    耐焊弧应力测试仪-手触屏调节

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 机械鲁工 机械鲁工 机械鲁工 机械鲁工